Can be encoded to produce 256 flash qualities (in line with IALA standards),
Can be equipped with RS485 interface (for docking with remote control telemetry terminal).
High rise building marking;Telecom tower marking;Road obstruction marking;
Navigation aid Port, dock entrance&walkway;Buoy marking
Installation guidance:
- Turn on the lamp body and adjust the flash quality (refer to this manual). When leaving the factory, the quality of the lamp is set to “17”.
- Make sure the battery voltage is between 12 volts and 14.6 volts. If the battery voltage is too low, charge in the sun for several hours in advance.
- Turn the lamp base switch S1 up to “ON”, to work properly (except during the day).
- It is recommended to test whether the navigation lights work properly. An opaque item (such as a towel or coat) can be placed on a beacon lens to see if the flash is flashing according to the light quality set.
- Fix the navigation light on a flat horizontal surface. Installation complete.
Issues | Measures taken |
Navigation lights not working | • Make sure the beacon is in a dark environment.Check that the input power cord is connected and that the polarity is connected correctly.• Check that the input supply voltage is above 12 V (rated voltage 12 V). |
No change in luminous lamp | Turn the rotary switch back and forth several times, feeling obvious contact in place |
The navigation lights can't work all night | Turn off the switch on the circuit board and place the light in the sun for hours to saturate the battery.Adjust the quality of the lamp and reduce the luminous ratio.• Make sure the solar panel is clean and not obscured by objects. |
Quality assurance:
Quality Assurance Conditions
1. the installation of the beacon lamp must be correctly installed in accordance with the product instructions.
2. shall not change electrical specifications and circuits without manufacturer’s confirmation.
3. warranty for solar modules and batteries used in conjunction with the navigation lamp is specified separately.
Reviews
There are no reviews yet.